Lace KAL Project Planning, Part 2
Most regions of the world with strong lace-knitting traditions used a two-ply yarn for lace pieces because this balanced structure is the most receptive to opening up with blocking to reveal the openwork patterns. Brooklyn Tweed’s Shelter, Loft, Vale, and Plains are all constructed on this principle. The worsted preparation of Vale and Plains lends extra strength to the yarn so it can better withstand a stiff blocking, and the smooth alignment of the fibers gives crisp definition to the stitches. Woolen-spun lace has a more rustic look and is perfect for projects with a cozy farmstead feel. We love Loft for Shetland-style haps in particular.
NeedlesMost knitters find they prefer needles with sharper tips for knitting lace; it’s easier to insert such a needle tip through multiple stitches during complex decrease maneuvers. Many also like a bit of extra traction to help control their tension — wood or coated metal needles will grip the stitches more than slick aluminum. This isn’t to say you can’t knit lace on your usual needles with perfect success, but if you find yourself struggling to draw a loop through a k3tog or to keep your yarnovers consistent in size, trying a lace-specific needle may give you the extra control you need.
Extra NotionsWhen you’re establishing a lace pattern and can’t yet see the motifs taking shape, it can be helpful to place stitch markers at strategic points. Marking off every repetition of a large chart, or every few repetitions of a small one, can make it much easier to find a missed increase or decrease if your stitch count is off at the end of a long row. (If working in the round, don't forget to use a visually distinctive marker at the beginning-of-round so you know when it's time to progress to the next row of your chart.) Some lace knitters also like to use lifelines. A lifeline is a thin strand of non-sticky yarn, string, dental floss, or any other material you’ll easily be able to pull out later. It runs through all of the stitches in a single row so that you can rip back to that point without having to recapture hundreds of loose stitches in lace patterning. Some lace needles come with a little hole in the base of the needle above the cord so you can tie your lifeline through the hole and drag it through the stitches as you work. If your needle isn’t made this way, simply thread the lifeline on a darning needle and run it through the stitches while they hang on the needle cord. Whether and when to use lifelines is entirely a matter of personal preference and confidence. You can place one at regular intervals just to be safe; you can place one at a change in motifs when you’re sure the work is correct but feel anxious about the next section, or you can never use one at all and simply trust to your own skill and savvy.
Swatching & Blocking
Your pattern may call for multiple swatches in different fabrics, so give yourself plenty of time for the swatching phase. Counting stitches within a lace motif can be difficult. If your pattern reads, “25 stitches x 36 rows = 4” in lace pattern,” you can make your job easier by placing locking stitch markers on either side of 25 stitches and at the bottom and top of 36 rows while you’re working, then use these points to make your measurements when the swatch is finished. Proper blocking is essential for lace. Your work may look dishearteningly like a heap of ramen noodles when it’s fresh off the needles, but a good stretching will open up the motifs to reveal the beautiful design you’ve created. Deciding how much to stretch your fabric is a matter of balancing your preferences, the designer’s intentions, and what the yarn is communicating about its needs. Using your stitch markers as a guide, you can judge whether to apply a little more or less tension. If the fabric is fighting back and you still can’t stretch your markers to 4” apart, you may need to try a new swatch on a larger needle. If you’re at 4” without stretching enough to really flatten out the fabric and open up the eyelets, you’ll need a smaller needle — or a sense of peace about having a shawl that’s larger than planned.Most knitters use either T-pins or blocking wires to stretch their lace. Pins are perfect for designs with toothed edges, but will leave points where you don’t want them along a straight edge. Blocking wires can be woven through the fabric all along the edge and then secured with pins to put the stitches under even tension everywhere, forming a perfectly even perimeter around your shawl. We’ll post a tutorial on our preferred blocking practices later in the KAL, but your swatch is a good place to get a feel for what you’ll be doing to the final piece. Are you ready to cast on? We are! Only 5 more days until the KAL begins…