From Jared: Hawser Design Spotlight
Posted by Jonathan on
I wanted to take some time today to share a bit about Hawser – one of my new designs in BT Fall 14. When I first started working on this garment, I hoped to adapt some of the qualities found in traditional fisherman sweaters into a more modern and flattering wardrobe item for women. Sometimes design ideas behave really well – doing exactly what you think they’ll do from concept to execution – while other times, it's more like a wrestling match. Hawser was one of those, and went through a few different iterations on its journey. Perhaps sharing some info about the design's evolution will give you some modification ideas of your own! . . An A-line silhouette is one of my favorite sweater shapes, especially for cozy, knock-around, fall and winter garments, so that’s where I began. The super-sized rope cables are quite large (A “hawser” is a thick rope or cable used for mooring or towing a ship, and is derived from the French word haucier – “to hoist”) and needed to be handled carefully to avoid overwhelming the wearer. I started with 4 – which immediately looked like too much, so took one out and went for a 3-cable arrangement. I originally drafted the garment with a traditional set-in sleeve yoke placing the two outer cables flush against the armholes. It turned out to be an unflattering, bulky fit at the shoulder, and looked to me like an awkward meeting of sleeve and body. So that idea was out. I wasn’t necessarily feeling like a raglan or round yoke would work here either, so took some time to chew on other ideas for a few days (giving an idea time to marinate is essential for me to find solutions to design problems, I've learned). . . To leave some extra room for the allover double moss stitch at the shoulder (rather than having the cable fall right on the seam line) – a drop shoulder seemed like a viable option, though I wanted to avoid the bulk of extra fabric at the underarm that a traditional drop shoulder provides. To make the upper yoke more fitted, I gave the shoulder line a more dramatic slope and added an outward-leaning slope on the armhole edge; with this new shape, the sleeve would join the body well below the shoulder, all the while avoiding an excess fabric problem of a standard drop shoulder. Things started feeling better at this point! . . The change for a (modified) drop-shoulder combined with the A-line shape threatened to created an overly boxy garment, so adding a slim sleeve that fits directly into the armhole seemed like an appropriate final touch for the fit. A bonus of having a sloped armhole opening also meant that no sleeve cap shaping would be required – the sleeve couldn't be simpler! The results still hint at that boxy look, but with a more anatomically friendly silhouette. The final shape also allows the double moss stitch to go over the shoulder (see the photo #2 above), which kept that area of the garment from becoming a visual eyesore like it was in the original. The schematic below shows the final shape (and knitting direction) of the garment – which is worked circularly from hem to underarm with the front and back of the yoke worked flat; sleeves are worked circularly in their entirety. Aside from shape and fit (the foundation of every garment) – you know I love the subtle details! There are a few little things stashed away in this design that I thought I’d highlight, as they’re sometimes less apparent in photographs. There is continuation of the 1x1 hem ribbing running up along the sweater’s side “seams” in a band, creating a visual detail that also hide the garment’s A-Line shaping (double moss stitch can start looking a little messy when shaping is worked directly into the stitch pattern). You can get a little peek of that in photo #1 above – look just below the the lower portion of the left arm. The large cable crosses – occurring over a total of 17 stitches – utilize a special yarn over technique on crossing rounds to provide a little extra slack for the working yarn as it carries across the wide cable; this keeps the finished cable from distorting or buckling. Finally, a doubled collar (knit to twice the desired depth then folded in and tacked down to the inside of the garment) gives a sturdy finish to the wide crew neck and balances out some of the bolder effects of the deep hem and large vertical motifs. .
. Here is a photo of one of my first swatches for the design, hanging out under another design swatch (this one didn’t make it into the final collection, but I have plans for her still!). All in all, it was a fun process from start to finish. I hope you've enjoyed reading about this sweater's journey, and I can’t wait to see what sort of variations start popping up out in the world! Thanks for reading and all my best, Jared